Nolathane Bush Rear Differential mount in cradle bushing 49181 Premium Quality

$122.84
RRP $147.41
SAVE $24.57 (17%)
In Stock


Calculate Shipping



Sydney Pickup - $0.00
Pickup from Sydney Warehouse 186 Power Street Glendenning NSW 2761
Australia Post-Eparcel - $0.00
Australia Post Parcel Post
Australia Express Post - $0.00

WHY NOLATHANE YOUR CAR

Original rubber suspension bushings are compressed or chemically bonded to the suspension components in which they are installed. In the case of a metallastic (steel cased) bush, the rubber is compressed at the time of manufacture and chemically bonded to the metal centre sleeve and outer steel shell. The rubber bush is normally press-fitted into the suspension component such as a control arm, then bolted to the chassis. In this way, the capacity for suspension movement or rotation is restricted. The rubber suspension bush design requires delicate compromise, as it must be soft enough to permit sufficient rotational movement whilst maintaining alignment settings.

Unlike rubber, Nolathane polyurethane suspension bushings are not bonded by compression. Nolathane bushings are mechanically fitted with minimal crush of the urethane material, and the centre pin is lubricated so the component freely pivots without restriction. Combined with Nolathane's ability to maintain the bush shape, this free pivoting provides sharper handling response and greatly increased suspension control.

Stronger !

Nolathane suspension bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD’s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Smarter !

Nolathane adjustable bushings can alignment correction and Increased tensile strength,It can make Your car less change in suspension geometry under load, braking and through corners.

Safety !

The original strut rod to chassis bush (mounted just below the bottom radiator support) is a relatively soft hydraulic or fluid filled bush.Nolathane's replacement strut rod to chassis bushings provide improved brake pedal feel without harshness and removes the squirming or wandering under braking. You can actually feel the difference!

(NA-Bush-F1803L1817)

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

CONTENTS:Nolathane Rear Differential mount in cradle bushing

Part Number:49181

SUIT: Subaru Impreza GC SEDAN, GF WAGON 4CYL Excl Wrx And Sti 4/1993-9/2000(Rear mount - OD=55, L=41mm)
Subaru Impreza GD SEDAN, GG WAGON MY01-02 4CYL Excl Wrx And Sti 10/2000-9/2002(Rear mount - OD=55, L=41mm)
Subaru Impreza GD SEDAN, GG WAGON MY03-07 4CYL Excl Wrx And Sti 9/2002-8/2007(Rear mount - suits MY03-04 models - OD=55, L=41mm)
Subaru Impreza Wrx GC SEDAN, GF WAGON 4CYL 4/1993-9/2000(Rear mount - OD=55, L=41mm)
Subaru Impreza Wrx GD SEDAN MY01-02 4CYL 10/2000-9/2002(Rear mount - OD=55, L=41mm)
Subaru Impreza Wrx GG WAGON MY01-02 4CYL 10/2000-9/2002(Rear mount - OD=55, L=41mm)
Subaru Impreza Wrx GD SEDAN MY03-07 4CYL 9/2002-8/2007(Suits MY03-04 models - rear mount - OD=55, L=41mm)
Subaru Impreza Wrx GG WAGON MY03-07 4CYL 10/2002-8/2007(Rear mount - suits MY03-04 models - OD=55, L=41mm)
Subaru Impreza Wrx Sti GC SEDAN, GF WAGON 4CYL 4/1993-9/2000(Rear mount - OD=55, L=41mm)
Subaru Impreza Wrx Sti GD SEDAN, GG WAGON MY01-02 4CYL 10/2000-9/2002(Rear mount - OD=55, L=41mm)
Subaru Impreza Wrx Sti GD SEDAN, GG WAGON MY03 4CYL 10/2002-9/2003(Rear mount - OD=55, L=41mm)
Subaru Impreza Wrx Sti GD SEDAN, GG WAGON MY04 4CYL 10/2003-9/2004(Rear mount - OD=55, L=41mm)
Subaru Legacy BD, BG 4CYL 6/1994-8/1998(Rear OD = 55mm)
Subaru Liberty BD, BG 4CYL 6/1994-8/1998(Rear OD = 55mm)
Subaru Outback BG 4CYL 7/1996-8/1998(Rear OD = 55mm)

SKU NA-Bush-F1803L1817
Brand Nolathane

Be The First To Review This Product!

Help other United Auto Parts users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category