SKU: NA-Bush-F1803L1458

Nolathane Bush Rear Shocks upper bushing 42361 TOYOTA FORD MITSUBISHI NISSAN

$25.59
RRP $30.71
SAVE $5.12 (17%)
In Stock


Calculate Shipping



Sydney Pickup - $0.00
Pickup from Sydney Warehouse 186 Power Street Glendenning NSW 2761
Australia Post-Eparcel - $0.00
Australia Post Parcel Post
Australia Express Post - $0.00

Description

WHY NOLATHANE YOUR CAR

Original rubber suspension bushings are compressed or chemically bonded to the suspension components in which they are installed. In the case of a metallastic (steel cased) bush, the rubber is compressed at the time of manufacture and chemically bonded to the metal centre sleeve and outer steel shell. The rubber bush is normally press-fitted into the suspension component such as a control arm, then bolted to the chassis. In this way, the capacity for suspension movement or rotation is restricted. The rubber suspension bush design requires delicate compromise, as it must be soft enough to permit sufficient rotational movement whilst maintaining alignment settings.

Unlike rubber, Nolathane polyurethane suspension bushings are not bonded by compression. Nolathane bushings are mechanically fitted with minimal crush of the urethane material, and the centre pin is lubricated so the component freely pivots without restriction. Combined with Nolathane's ability to maintain the bush shape, this free pivoting provides sharper handling response and greatly increased suspension control.

Stronger !

Nolathane suspension bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD’s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Smarter !

Nolathane adjustable bushings can alignment correction and Increased tensile strength,It can make Your car less change in suspension geometry under load, braking and through corners.

Safety !

The original strut rod to chassis bush (mounted just below the bottom radiator support) is a relatively soft hydraulic or fluid filled bush.Nolathane's replacement strut rod to chassis bushings provide improved brake pedal feel without harshness and removes the squirming or wandering under braking. You can actually feel the difference!

Features

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

CONTENTS:Nolathane Rear Shock absorber upper bushing

Part Number:42361

SUIT: Toyota Hilux 4 Runner LN130, RN130, VZN130, YN130 4/6CYL 10/1989-6/1996
Toyota Previa TCR10, 11, 20, 21 4CYL 9/1990-8/2000(Suits TCR10 and TCR20 models)
Toyota Rav 4 SXA10, 11, 16 4CYL 4/1994-5/2000
Toyota Rav 4 ACA20, 21, 22, 23 4CYL 5/2000-11/2005
Toyota Spacia YR22 4CYL 10/1993-1/1998
Toyota T-18 TE72 4CYL 10/1979-7/1983
Toyota Tarago YR20, 21, 22, 31, CR21 4CYL 1/1983-10/1990
Toyota Tarago TCR10, 11, 20, 21 4CYL 9/1990-8/2000(Suits TCR10 and TCR20 models)
Toyota Tercel AL25 4CYL 10/1983-12/1988
Ford F Series F100, F250, F350 6/8CYL 2WD 1970-1981(Suits Koni brand shocks)
Ford F Series F100, F250, F350 6/8CYL 4WD 1970-1981(Suits Koni brand shocks)
Mitsubishi Pajero NA, NB, NC, ND, NE, NF, NG 4/6CYL Coil Spring Rear 1983-5/1991
Mitsubishi Pajero NA, NB, NC, ND, NE, NF, NG 4/6CYL Leaf Spring Rear 1983-5/1991(Excl NA and NB models)
Nissan 720 CG 4CYL RWD 1/1980-12/1985

Specifications

SKU NA-Bush-F1803L1458
Brand Nolathane

Reviews

Be The First To Review This Product!

Help other United Auto Parts users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category